Model Name |
FSP150-K24-36 |
Wattage |
150W |
Product Highlight |
Efficiency Level |
87% / 115Vac & 89% / 230Vac |
|
Output Voltage |
36V |
|
Size |
50.8 ( 2") x 101.6 ( 4" ) x 33 ( 1.29") mm |
Input Specification |
Input Type |
AC-DC |
|
Input Voltage |
90~132 Vac |
|
Input Frequency |
47~63Hz |
|
Input Current |
1.7A (rms) for 100 - 120 VAC 0.85A (rms) for 200 - 240 VAC |
Output Specification |
Output voltage/current |
Output1 |
|
36 V , 4.17 A |
|
Ripple and noise |
Output1 |
|
360mV |
|
Over voltage protection |
Output1 |
|
110% - 140% |
|
Transient response |
Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500μs after a 25% step load change |
Environmental Specification |
De-rating |
De-rate from 100% at +50℃,
linearly to 50% at +70℃ |
|
Storage temperature |
-20℃ to +85℃ |
|
Relative humidity |
5% to 95% non-condensing |
General Specification |
Efficiency |
86% /115Vac & 88% / 230Vac @Full Road% minimum on all models |
|
Hold-up time |
10 ms minimum at 10 VAC |
|
Withstand voltage |
3000 VDC from input to output,
1500 VDC from input to ground,
500 VDC from output to ground, |
|
MTBF |
150,000 hours minimum at full load at 25 ℃ ambient, calculated per MIL-HDBK-217F |
EMC performance |
EN55022 |
Class B Conducted, Class B radiated |
|
FCC |
Class B Conducted, Class B radiated |
|
VCCI |
Class B Conducted, Class B radiated |
|
EN61000-3-2 |
Harmonic distortion, Class A and D |
|
EN61000-3-3 |
Line flicker |
|
EN61000-4-2 |
ESD, ±8 KV air, ±4 KV contact |
|
EN61000-4-3 |
Radiated immunity, 3 V/m |
|
EN61000-4-4 |
Fast transient/burst, ±1 KV |
|
EN61000-4-5 |
Surge, ±1 KV diff., ±2 KV com. |
|
EN61000-4-6 |
Conducted immunity, 3 Vrms |
|
EN61000-4-8 |
Magnetic field immunity, 1 A/m |
|
EN61000-4-11 |
Voltage dip immunity, 30% reduction for 500ms , > 95% reduction for 10ms |
Mechanical |
Weight |
200g |
|
Connector Type - Input |
P1 : JST header P/N V3P-VH-B or equivalent |
|
Connector Type - Output |
P2: JST header P/N V8P-VH-B or equivalent P3: JST header P/N B4B-PH-K-S or equivalent P4: JST header P/N B2B-PH-K-S or equivalent |
|
Remote Control |
No |
|
Dimension |
50.8mm (W) × 101.6 mm (H) × 33.0mm (L) |
Safety |
UL60950-1,TUV |
Inrush current |
80A @115VAC ; 160A @ 230VAC |
Earth leakage current |
275μA max. @264VAC, 63Hz |