We apologize that we don't accept credit card payments, but we accept PayPal only for now.

Welcome

FSP Hydro G PRO 850W (HG2-850-G5T)

More Views

FSP Hydro G PRO 850W (HG2-850-G5T)
$169.99

Availability: In stock


  • Complies with ATX12V V3.1 & EPS12V V2.92

  • Intelligent fan speed control

  • Quiet and long-lasting 120mm FDB fan

  • Powerful +12V single rail design

  • 105C Japanese electrolytic capacitors

  • Intel's Latest CPU 

Description

Details

 

Power Excursion to 200%

Increased tolerance for high power spikes, for the compatible PSU platforms. For 450W PSU, up to 200% of the PSU's rated power for 100μs with a 10% duty cycle.

More Powerful with Compact Size

New HYDRO G Pro series upgrades from original HYDRO G, took the best features of HYDRO G series and made them even better. With smaller size, improves performance and more powerful output give you ultra-performance.

Keep in Compliance IEC/EN 62368

FSP Group features the latest in green power technology, and provide a full kinds of additional safety approvals to keep designs ahead of the changing regulations. FSP has upgraded the majority of power supplies to the new IEC/EN 62368 standard for your gaming rigs.

 

80 Plus® Gold Certification

HYDRO G Pro series is a power supply with 80 PLUS® Gold Certification that guarantees to operate at a minimum of 90% efficiency at 50% load of PSU rated power and as a result to reduce lots of electricity cost.

ECO Switch, Quieter and Longer Lasting Fan

You can adjust the button to suit your needs, when Eco Button is switched on, making it easier to run on lower consumption and whisper silent. The fan in the power supply will not operate when the power supply is under 30% loading for silent state.

 

Compatible with Latest PC-technology

Corresponds exactly to a variety of the latest CPU platform. Complies with Intel ATX12V V3.0 Power supply design guide and make sure the peak power in 12V supports for the latest Intel and AMD platform and delivers full power to your PC system.


Multiple-unit Connectors

The ATX 12V CPU power connector is able to support CPUs for enough watt. HYDRO G PRO series from 850W to 1000W packages 2 x 4+4 pins power connectors more than regular PSUs and provide the stable and peakoutput to your new config will require.

Fully Modular Design for Quick and Easy Installation

Fully modular design simplifies installation and allows you to use only the cables you need, for a neater and cleaner build.

Off_Wet Technology

Hydro G Pro is covered with conformal coatings to guarantee reliable performance in a harsh environment. It can work perfectly with 95%RH while others cannot.

 

LLC Half Bridge Topology with DC-DC Module Design

New HYDRO G Pro series features extremely tight voltage regulation to make the output voltage regulation under +/- 1% at any load change and offer you supreme efficiency and voltage stability.

 

Efficiency
noise

Cables

Connectors

 
 
atx cable 24 pin EPS 4 4 pin atx cable gen5 pin pcie 6+2 pin hd stat molex 2.5 floppy
ATX 20+4 4+4 PIN PCIe 12+4 PCIe 6+2 SATA Molex
(PERIPHERAL)
Floppy
  1 2 1 6 14 5 1
 
Additional Information

Additional Information

Specifications HG2-850 Gen5 Power Supply Specifications Model: HG2-850, Gen5 Rated Output Power: 850W Form Factor: ATX ATX Version: ATX 3.1 PCIe Support: PCIe 5.1 80 PLUS Certification: Gold Input Voltage: 100–240V AC Input Current: 11–5.5A Input Frequency: 50–60Hz PFC (Power Factor Correction): Active PFC Efficiency: ≥90% at typical load Fan Type: 120mm FDB (Fluid Dynamic Bearing) Fan Dimensions (L x W x H): 150 x 150 x 86 mm Operating Temperature: 0–50℃ Protection Features: OCP (Over Current Protection) OVP (Over Voltage Protection) OPP (Over Power Protection) SCP (Short Circuit Protection) OTP (Over Temperature Protection) PSU Efficiency Level Certification: Cybenetics Gold DC Output Specifications +3.3V: Max Output Current: 20A Max Combined Power (shared with +5V): 120W +5V: Max Output Current: 20A Max Combined Power (shared with +3.3V): 120W +12V: Max Output Current: 70.83A Max Combined Power: 850W -12V: Max Output Current: 0.3A Max Combined Power: 3.6W +5Vsb (Standby): Max Output Current: 2.5A Max Combined Power: 12.5W Total Power Output: 850W
Features With native PCIe 5.1 connector and cable, ideally for new Nidia 4000 series graphic card. Tight voltage regulation to make the output voltage regulation under +/- 1% at any load change and offer you supreme efficiency and voltage stability. With Eco switch for quieter operation.With native PCIe 5.1 connector and cable idally for new Nidia 4000 series graphic card. A fully modular design simplifies installation and allows you to use only the cables you need for a neater and cleaner build. Japanese electrolytic capacitors ensure a longer lifetime and protect your PSU from sudden power changes. With conformal coatings to guarantee reliable performance in a harsh environment. Fully-modular design not just for easier installation, but also provides your system a neat and tidy look. Covered with exclusive conformal coating which guarantees to offer better and reliable performance in harsh environments and is tested to work in environments up to 95% relative humidity. A single +12V rail design can deliver stable power and avoid any overloading conditions. Smarter, Quieter and Longer Lasting Eco Friendly Fan
Warranty 10 years warranty
Short Description
  • Complies with ATX12V V3.1 & EPS12V V2.92
  • Intelligent fan speed control
  • Quiet and long-lasting 120mm FDB fan
  • Powerful +12V single rail design
  • 105C Japanese electrolytic capacitors
  • Intel's Latest CPU 
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Sign up now to receive updates on our latest products and promotions.

Copyright©2019 FSP GROUP USA, All Rights Reserved.

Privacy Notice - Terms of Use